INSTALLER ET CONFIGURER
AVALAUNCH

avalaunch.xml

<!--example config file-- from xavbox.com>
<avalaunch>
<!--
Name of language file. Leave out this setting (or type "default")
for English language.
-->
<language>
francais.ini
</language>
<clock>
<sntp enabled="0">
<server>
10.0.0.1
</server>
<port>
123
</port>
</sntp>
</clock>
<network setup="1" type="static">
<ip>
192.168.1.20
</ip>
<subnet>
255.255.255.0
</subnet>
<gateway>
192.168.1.1
</gateway>
<dns1>
193.252.19.3
</dns1>
<dns2>
193.252.19.4
</dns2>
<proxy enabled="0">
<server>
10.0.0.1
</server>
<port>
8080
</port>
</proxy>
</network>
<hardware>
<fanspeed>
20
</fanspeed>
</hardware>
<voiceserver enabled="1">
<ip>
</ip>
</voiceserver>
<ftpserver enabled="1" allowboostmode="1" showrootfreespace="0">
<port>
21
</port>
<pasvportstart>
2048
</pasvportstart>
<pasvportend>
32767
</pasvportend>
<maxusers>
2
</maxusers>
</ftpserver>
<quickstart>
<!--
To enable launching of the last launched XBE when you hold
the left trigger while booting Avalaunch, set this setting
to 1. Otherwise, set it to 0.
-->
<enablelastrun>
1
</enablelastrun>
<righttrigger enabled="0">
<path>
</path>
<filename>
</filename>
</righttrigger>
<abutton enabled="0">
<path>
</path>
<filename>
</filename>
</abutton>
<bbutton enabled="0">
<path>
</path>
<filename>
</filename>
</bbutton>
<xbutton enabled="0">
<path>
</path>
<filename>
</filename>
</xbutton>
<ybutton enabled="0">
<path>
</path>
<filename>
</filename>
</ybutton>
</quickstart>
<user name="Default" password="">
<skin name="bodyxavbox"/>
<mount>
<!--
Specify whether or not to mount drives

If omitted the F:\ drive will be mounted by default
If omitted the G:\ drive will NOT be mounted by default
-->
<F enabled="1"/>
<G enabled="0"/>
</mount>
<preferences>
<!--
Specify your preferred onscreen keyboard

1 = original keyboard from xb-ftp
2 = original keyboard from xToolBox

If omitted the keyboard will default to the first one
-->
<keyboard type="2"/>
<!--
Specify your preferred IR remote sensitivity in milliseconds

If omitted the sensitivity will default to '230'
-->
<ir-remote sensitivity="230"/>
<!--
Specify the preferred transparency to use in the
different 'windows' (IRC, telnet, autoupdate)

Can be a value between 0 and 255 - where 0 is full transparency

If omitted the transparency will default to '136'
-->
<window transparency="136"/>
<!--
Specify the preferred color of your led when idle and busy.
LED color can be one of the following

off
red
green
orange

If omitted the color will default to green when idle and red when busy
-->
<led idle="green" busy="red"/>
<!--
Specify how the screen saver should act

enabled;
0 = don't enable the screen saver
1 = enable the screen saver

If omitted the screen saver will be enabled by default

delay;
specify the number of seconds to wait before the screen saver is activated

If omitted the delay will default to '300'
-->
<screensaver enabled="0" delay="300"/>
<!--
Specify whether the Astronomy Picture of the Day (APOD)
should be loaded as the background or not

enabled;
0 = don't download the Astronomy Picture of the Day
1 = download the Astronomy Picture of the Day

If omitted the Astronomy Picture of the Day will not be downloaded by default

random;
0 = download the current Astronomy Picture of the Day
1 = download random (old) Astronomy Picture of the Day

If omitted the current Astronomy Picture of the Day will be downloaded by default

explanation;
0 = don't display the official explanation for the Astronomy Picture of the Day
1 = display the official explanation for the Astronomy Picture of the Day

If omitted the offical explanation of the Astronomy Picture of the Day will be displayed by default
-->
<apod enabled="0" random="1" explanation="1"/>
<!--
Specify whether or not videomode switching should be
allowed by using the controller

enabled;
0 = don't allow switching
1 = allow switching

If omitted the video mode will not be allowed switched by default
-->
<videomode enabled="0"/>
</preferences>
<sound>
<backgroundmusic enabled="1" cdda="1" cdmp3="1">
<path>
F:\music
</path>
</backgroundmusic>
</sound>
<newsfeed enabled="1">
<source url="www.xbox-scene.com/xbox1data/xbox-scene.xml"/>
<source url="www.xbins.org/xbins.xml"/>
<source url="www.maxconsole.com/rss/xboxfeed.rss"/>
</newsfeed>
<launcher>
<!--
Specify how the launcher should display icons

display;
0 = don't display icons
1 = display icons

If omitted the icons will be displayed

rotate;
0 = don't rotate icons (fixed)
1 = rotate icons

If omitted the icons will rotate

override (uses avalaunch_icon.png/avalaunch_icon.jpg/<name>.png/<name>.jpg in that order);
0 = don't override icons
1 = override if no icon is embedded in the xbe
2 = always override

If omitted the icons will be overriden if no icons is embedded in the xbe
-->
<icons display="1" rotate="1" override="1"/>
<!--
Specify whether or not the launcher should switch to the
video mode most suitable for the game as described
by the region (in the xbe) when launching a game

autoregion;
0 = don't switch
1 = switch according to the game region in the xbe

If omitted the video mode will not be switched by default
-->
<videomode autoregion="0"/>
<!--
Specify whether or not the launcher should launch an external application
when an audio CD/DVD is inserted

enabled;
0 = don't enable the audio player
1 = enable the audio player

If omitted the audio player will be enabled by default

path;
specify the path of the audio player that will be launched

If omitted the path will default to C:\xboxdash.xbe
-->
<audioplayer enabled="1" path="C:\xboxdash.xbe"/>
<!--
Specify whether or not the launcher should launch an external application
when a movie CD/DVD is inserted

enabled;
0 = don't enable the movie player
1 = enable the movie player

If omitted the movie player will be enabled by default

path;
specify the path of the movie player that will be launched

If omitted the path will default to C:\xboxdash.xbe
-->
<movieplayer enabled="1" path="E:\apps\dvdx\default.xbe"/>
</launcher>
<irc>
<!--
You can specify which font to use in the irc client.

If omitted the font will default to 'lucon' size '12'

NOTE!
This font setting may be obsolete once the skinning engine
is implemented
-->
<font name="framd" size="12"/>
<server>
irc.homelien.no
</server>
<nick>
Tjjjj
</nick>
<altnick>
_USER2_
</altnick>
</irc>
<telnet>
<!--
You can specify which font to use in the telnet client.

If omitted the font will default to 'lucon' size '12'

NOTE!
This font setting may be obsolete once the skinning engine
is implemented
-->
<font name="telnet" size="12"/>
<server>
not defined
</server>
</telnet>
<menu>
<!--
You can specify which font to use in the main menu.

If omitted the font will default to 'framd' size '20'

NOTE!
This font setting may be obsolete once the skinning engine
is implemented
-->
<font name="menu" size="20"/>
<!--
All menu entries has to be either an 'Item' or a 'List'
-->
<item name="XBox Media Player" path="E:\Apps\xbmp24\default.xbe"/>
<list presetname="Games">
<!--
Path to the folder to scan for xbe's.

The attribute scanlevel sets the levels of
sub folders to scan from the starting point

If omitted sub folders will be scanned 2 levels 'down'

e.g.: <path scanlevel="2">E:\Games</path>

meaning that all default.xbe's in
E:\Games (level 1) and
E:\Games\<folder> (level 2)
will be included in the list

NOTE!
If you want to divide your applications into sub groups
you can add 'List' items to a list

e.g.:
<list presetname="Games">
<list name="Action">
<path>
E:\Games\Action
</path>
</list>
</list>
-->
<path scanlevel="2">
F:\Games
</path>
<path>
E:\Games
</path>
<path>
E:\HDDLoader
</path>
<path>
F:\HDDLoader
</path>
</list>
<list presetname="Applications">
<path>
E:\Apps
</path>
<path>
F:\Apps
</path>
</list>
<list presetname="Emulators">
<path>
E:\Emulateurs
</path>
<path>
F:\Emulateurs
</path>
</list>
<item presetname="File manager" function="FileManager"/>
<item presetname="IRC" function="IRC"/>
<item presetname="Telnet" function="Telnet"/>
<item presetname="Settings" function="Settings"/>
<item presetname="Restart" function="Restart"/>
<item presetname="Shutdown" function="Shutdown"/>
</menu>
</user>
</avalaunch>

Cliquez sur "configuration d'Avalaunch" pour le configurer directement du dashboard.